HL7 FHIR Implementation Guide: DK Core
3.3.0 - release Denmark flag

This page is part of the HL7 FHIR Implementation Guide: DK Core (v3.3.0: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Resource Profile: DkCoreCondition - Detailed Descriptions

Active as of 2024-12-11

Definitions for the dk-core-condition resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Condition
2. Condition.extension
SlicingThis element introduces a set of slices on Condition.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 4. Condition.extension:dueTo
    Slice NamedueTo
    Control0..1
    TypeExtension(Condition Due To) (Extension Type: Choice of: CodeableConcept, Reference(Condition, Procedure, MedicationAdministration, Immunization, MedicationStatement))
    6. Condition.extension:conditionLastAssertedDate
    Slice NameconditionLastAssertedDate
    ShortLast date a condition was confirmed valid in its current state
    Control0..1
    TypeExtension(ConditionLastAssertedDate) (Extension Type: dateTime)
    8. Condition.extension:notFollowedAnymore
    Slice NamenotFollowedAnymore
    ShortDate where a condition lost focus in a specific clinical context
    Control0..1
    TypeExtension(NotFollowedAnymore) (Extension Type: dateTime)
    10. Condition.code
    12. Condition.code.coding
    ShortCondition code, [DA] tilstandskode
    SlicingThis element introduces a set of slices on Condition.code.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ system
    • 14. Condition.code.coding:FSIIIConditionCode
      Slice NameFSIIIConditionCode
      Short[DA] FSIII tilstandskode
      Control0..1
      16. Condition.code.coding:FSIIIConditionCode.system
      Control1..?
      Pattern Valueurn:oid:1.2.208.176.2.21
      18. Condition.code.coding:SCTConditionCode
      Slice NameSCTConditionCode
      ShortSNOMED CT condition code
      Control0..1
      BindingThe codes SHALL be taken from Condition/Problem/DiagnosisCodes
      (required to http://hl7.org/fhir/ValueSet/condition-code)
      20. Condition.code.coding:SCTConditionCode.system
      Control1..?
      Pattern Valuehttp://snomed.info/sct
      22. Condition.code.coding:FFBConditionCode
      Slice NameFFBConditionCode
      Short[DA] FFB undertemakode
      Control0..1
      24. Condition.code.coding:FFBConditionCode.system
      Control1..?
      Pattern Valueurn:oid:1.2.208.176.2.22
      26. Condition.code.coding:SKS-D
      Slice NameSKS-D
      Short[DA] Kode fra D-hierarkiet i SKS
      Control0..1
      28. Condition.code.coding:SKS-D.system
      Control1..?
      Pattern Valueurn:oid:1.2.208.176.2.4.12
      30. Condition.code.coding:ICPC2code
      Slice NameICPC2code
      ShortICPC2 code
      Control0..1
      32. Condition.code.coding:ICPC2code.system
      Control1..?
      Pattern Valueurn:oid:1.2.208.176.2.31
      34. Condition.subject
      TypeReference(Danish Core Patient Profile)
      36. Condition.recorder
      TypeReference(Danish Core Practitioner Profile, PractitionerRole, Danish Core Patient Profile, Danish Core Related Person Profile)
      38. Condition.asserter
      TypeReference(Danish Core Practitioner Profile, PractitionerRole)

      Guidance on how to interpret the contents of this table can be found here

      0. Condition
      Definition

      A clinical condition, problem, diagnosis, or other event, situation, issue, or clinical concept that has risen to a level of concern.

      ShortDetailed information about conditions, problems or diagnoses
      Control0..*
      Is Modifierfalse
      Summaryfalse
      Invariantscon-3: Condition.clinicalStatus SHALL be present if verificationStatus is not entered-in-error and category is problem-list-item (clinicalStatus.exists() or verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code = 'entered-in-error').exists() or category.select($this='problem-list-item').empty())
      con-4: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission (abatement.empty() or clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='resolved' or code='remission' or code='inactive')).exists())
      con-5: Condition.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code='entered-in-error').empty() or clinicalStatus.empty())
      dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      con-3: Condition.clinicalStatus SHALL be present if verificationStatus is not entered-in-error and category is problem-list-item (clinicalStatus.exists() or verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code = 'entered-in-error').exists() or category.select($this='problem-list-item').empty())
      con-4: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission (abatement.empty() or clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='resolved' or code='remission' or code='inactive')).exists())
      con-5: Condition.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code='entered-in-error').empty() or clinicalStatus.empty())
      2. Condition.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      4. Condition.extension
      Definition

      An Extension


      May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortExtensionAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Condition.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 6. Condition.extension:dueTo
        Slice NamedueTo
        Definition

        Further conditions, problems, diagnoses, procedures or events or the substance that caused/triggered this Condition.

        ShortCauses for this Condition
        Comments

        Although a condition may be caused by a substance, this is not intended to be used to record allergies/adverse reactions to substances.

        Control0..1
        TypeExtension(Condition Due To) (Extension Type: Choice of: CodeableConcept, Reference(Condition, Procedure, MedicationAdministration, Immunization, MedicationStatement))
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        8. Condition.extension:conditionLastAssertedDate
        Slice NameconditionLastAssertedDate
        Definition

        Extension for the last date a Condition-instance was confirmed valid in its current state. E.g. with its current clinical- and verification status, stage and severity. Typically the last performed follow-up

        ShortLast date a condition was confirmed valid in its current state
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(ConditionLastAssertedDate) (Extension Type: dateTime)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        10. Condition.extension:notFollowedAnymore
        Slice NamenotFollowedAnymore
        Definition

        Extension for the date where a condition lost focus in a specific clinical context

        ShortDate where a condition lost focus in a specific clinical context
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(NotFollowedAnymore) (Extension Type: dateTime)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        12. Condition.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Summaryfalse
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        14. Condition.clinicalStatus
        Definition

        The clinical status of the condition.

        Shortactive | recurrence | relapse | inactive | remission | resolved
        Comments

        The data type is CodeableConcept because clinicalStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

        Control0..1
        This element is affected by the following invariants: con-3, con-4, con-5
        BindingThe codes SHALL be taken from ConditionClinicalStatusCodeshttp://hl7.org/fhir/ValueSet/condition-clinical|4.0.1
        (required to http://hl7.org/fhir/ValueSet/condition-clinical|4.0.1)

        The clinical status of the condition or diagnosis.

        TypeCodeableConcept
        Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the condition as no longer active.
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        16. Condition.verificationStatus
        Definition

        The verification status to support the clinical status of the condition.

        Shortunconfirmed | provisional | differential | confirmed | refuted | entered-in-error
        Comments

        verificationStatus is not required. For example, when a patient has abdominal pain in the ED, there is not likely going to be a verification status. The data type is CodeableConcept because verificationStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

        Control0..1
        This element is affected by the following invariants: con-3, con-5
        BindingThe codes SHALL be taken from ConditionVerificationStatushttp://hl7.org/fhir/ValueSet/condition-ver-status|4.0.1
        (required to http://hl7.org/fhir/ValueSet/condition-ver-status|4.0.1)

        The verification status to support or decline the clinical status of the condition or diagnosis.

        TypeCodeableConcept
        Is Modifiertrue because This element is labeled as a modifier because the status contains the code refuted and entered-in-error that mark the Condition as not currently valid.
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        18. Condition.subject
        Definition

        Indicates the patient or group who the condition record is associated with.

        ShortWho has the condition?
        Control1..1
        TypeReference(Danish Core Patient Profile, Patient, Group)
        Is Modifierfalse
        Summarytrue
        Requirements

        Group is typically used for veterinary or public health use cases.

        Alternate Namespatient
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        20. Condition.recorder
        Definition

        Individual who recorded the record and takes responsibility for its content.

        ShortWho recorded the condition
        Control0..1
        TypeReference(Danish Core Practitioner Profile, PractitionerRole, Danish Core Patient Profile, Danish Core Related Person Profile, Practitioner, Patient, RelatedPerson)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        22. Condition.asserter
        Definition

        Individual who is making the condition statement.

        ShortPerson who asserts this condition
        Control0..1
        TypeReference(Danish Core Practitioner Profile, PractitionerRole, Practitioner, Patient, RelatedPerson)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

        Guidance on how to interpret the contents of this table can be found here

        0. Condition
        Definition

        A clinical condition, problem, diagnosis, or other event, situation, issue, or clinical concept that has risen to a level of concern.

        ShortDetailed information about conditions, problems or diagnoses
        Control0..*
        Is Modifierfalse
        Summaryfalse
        Invariantscon-3: Condition.clinicalStatus SHALL be present if verificationStatus is not entered-in-error and category is problem-list-item (clinicalStatus.exists() or verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code = 'entered-in-error').exists() or category.select($this='problem-list-item').empty())
        con-4: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission (abatement.empty() or clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='resolved' or code='remission' or code='inactive')).exists())
        con-5: Condition.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code='entered-in-error').empty() or clinicalStatus.empty())
        dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
        dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
        dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
        dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
        dom-6: A resource should have narrative for robust management (text.`div`.exists())
        2. Condition.id
        Definition

        The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

        ShortLogical id of this artifact
        Comments

        The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

        Control0..1
        Typeid
        Is Modifierfalse
        Summarytrue
        4. Condition.meta
        Definition

        The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

        ShortMetadata about the resource
        Control0..1
        TypeMeta
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        6. Condition.implicitRules
        Definition

        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

        ShortA set of rules under which this content was created
        Comments

        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

        Control0..1
        Typeuri
        Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        8. Condition.language
        Definition

        The base language in which the resource is written.

        ShortLanguage of the resource content
        Comments

        Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

        Control0..1
        BindingThe codes SHOULD be taken from CommonLanguages
        (preferred to http://hl7.org/fhir/ValueSet/languages)

        A human language.

        Additional BindingsPurpose
        AllLanguagesMax Binding
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        10. Condition.text
        Definition

        A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

        ShortText summary of the resource, for human interpretation
        Comments

        Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

        Control0..1
        TypeNarrative
        Is Modifierfalse
        Summaryfalse
        Alternate Namesnarrative, html, xhtml, display
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        12. Condition.contained
        Definition

        These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

        ShortContained, inline Resources
        Comments

        This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

        Control0..*
        TypeResource
        Is Modifierfalse
        Summaryfalse
        Alternate Namesinline resources, anonymous resources, contained resources
        14. Condition.extension
        Definition

        An Extension

        ShortExtension
        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Condition.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 16. Condition.extension:dueTo
          Slice NamedueTo
          Definition

          Further conditions, problems, diagnoses, procedures or events or the substance that caused/triggered this Condition.

          ShortCauses for this Condition
          Comments

          Although a condition may be caused by a substance, this is not intended to be used to record allergies/adverse reactions to substances.

          Control0..1
          TypeExtension(Condition Due To) (Extension Type: Choice of: CodeableConcept, Reference(Condition, Procedure, MedicationAdministration, Immunization, MedicationStatement))
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          18. Condition.extension:conditionLastAssertedDate
          Slice NameconditionLastAssertedDate
          Definition

          Extension for the last date a Condition-instance was confirmed valid in its current state. E.g. with its current clinical- and verification status, stage and severity. Typically the last performed follow-up

          ShortLast date a condition was confirmed valid in its current state
          Control0..1
          This element is affected by the following invariants: ele-1
          TypeExtension(ConditionLastAssertedDate) (Extension Type: dateTime)
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          20. Condition.extension:notFollowedAnymore
          Slice NamenotFollowedAnymore
          Definition

          Extension for the date where a condition lost focus in a specific clinical context

          ShortDate where a condition lost focus in a specific clinical context
          Control0..1
          This element is affected by the following invariants: ele-1
          TypeExtension(NotFollowedAnymore) (Extension Type: dateTime)
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          22. Condition.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
          Summaryfalse
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          24. Condition.identifier
          Definition

          Business identifiers assigned to this condition by the performer or other systems which remain constant as the resource is updated and propagates from server to server.

          ShortExternal Ids for this condition
          Comments

          This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..*
          TypeIdentifier
          Is Modifierfalse
          Summarytrue
          Requirements

          Allows identification of the condition as it is known by various participating systems and in a way that remains consistent across servers.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          26. Condition.clinicalStatus
          Definition

          The clinical status of the condition.

          Shortactive | recurrence | relapse | inactive | remission | resolved
          Comments

          The data type is CodeableConcept because clinicalStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

          Control0..1
          This element is affected by the following invariants: con-3, con-4, con-5
          BindingThe codes SHALL be taken from ConditionClinicalStatusCodes
          (required to http://hl7.org/fhir/ValueSet/condition-clinical|4.0.1)

          The clinical status of the condition or diagnosis.

          TypeCodeableConcept
          Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the condition as no longer active.
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          28. Condition.verificationStatus
          Definition

          The verification status to support the clinical status of the condition.

          Shortunconfirmed | provisional | differential | confirmed | refuted | entered-in-error
          Comments

          verificationStatus is not required. For example, when a patient has abdominal pain in the ED, there is not likely going to be a verification status. The data type is CodeableConcept because verificationStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

          Control0..1
          This element is affected by the following invariants: con-3, con-5
          BindingThe codes SHALL be taken from ConditionVerificationStatus
          (required to http://hl7.org/fhir/ValueSet/condition-ver-status|4.0.1)

          The verification status to support or decline the clinical status of the condition or diagnosis.

          TypeCodeableConcept
          Is Modifiertrue because This element is labeled as a modifier because the status contains the code refuted and entered-in-error that mark the Condition as not currently valid.
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          30. Condition.category
          Definition

          A category assigned to the condition.

          Shortproblem-list-item | encounter-diagnosis
          Comments

          The categorization is often highly contextual and may appear poorly differentiated or not very useful in other contexts.

          Control0..*
          BindingUnless not suitable, these codes SHALL be taken from ConditionCategoryCodes
          (extensible to http://hl7.org/fhir/ValueSet/condition-category)

          A category assigned to the condition.

          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          32. Condition.severity
          Definition

          A subjective assessment of the severity of the condition as evaluated by the clinician.

          ShortSubjective severity of condition
          Comments

          Coding of the severity with a terminology is preferred, where possible.

          Control0..1
          BindingThe codes SHOULD be taken from Condition/DiagnosisSeverity
          (preferred to http://hl7.org/fhir/ValueSet/condition-severity)

          A subjective assessment of the severity of the condition as evaluated by the clinician.

          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          34. Condition.code
          Definition

          Identification of the condition, problem or diagnosis.

          ShortIdentification of the condition, problem or diagnosis
          Control0..1
          BindingFor example codes, see Condition/Problem/DiagnosisCodes
          (example to http://hl7.org/fhir/ValueSet/condition-code)

          Identification of the condition or diagnosis.

          TypeCodeableConcept
          Is Modifierfalse
          Summarytrue
          Requirements

          0..1 to account for primarily narrative only resources.

          Alternate Namestype
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          36. Condition.code.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          38. Condition.code.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Condition.code.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 40. Condition.code.coding
            Definition

            A reference to a code defined by a terminology system.

            ShortCondition code, [DA] tilstandskode
            Comments

            Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

            Control0..*
            TypeCoding
            Is Modifierfalse
            Summarytrue
            Requirements

            Allows for alternative encodings within a code system, and translations to other code systems.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            SlicingThis element introduces a set of slices on Condition.code.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ system
            • 42. Condition.code.coding:FSIIIConditionCode
              Slice NameFSIIIConditionCode
              Definition

              A reference to a code defined by a terminology system.

              Short[DA] FSIII tilstandskode
              Comments

              Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

              Control0..1
              TypeCoding
              Is Modifierfalse
              Summarytrue
              Requirements

              Allows for alternative encodings within a code system, and translations to other code systems.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              44. Condition.code.coding:FSIIIConditionCode.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              46. Condition.code.coding:FSIIIConditionCode.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Condition.code.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 48. Condition.code.coding:FSIIIConditionCode.system
                Definition

                The identification of the code system that defines the meaning of the symbol in the code.

                ShortIdentity of the terminology system
                Comments

                The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                Control1..1
                Typeuri
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                Need to be unambiguous about the source of the definition of the symbol.

                Pattern Valueurn:oid:1.2.208.176.2.21
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                50. Condition.code.coding:FSIIIConditionCode.version
                Definition

                The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                ShortVersion of the system - if relevant
                Comments

                Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                NoteThis is a business version Id, not a resource version Id (see discussion)
                Control0..1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                52. Condition.code.coding:FSIIIConditionCode.code
                Definition

                A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                ShortSymbol in syntax defined by the system
                Control0..1
                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                Need to refer to a particular code in the system.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                54. Condition.code.coding:FSIIIConditionCode.display
                Definition

                A representation of the meaning of the code in the system, following the rules of the system.

                ShortRepresentation defined by the system
                Control0..1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                56. Condition.code.coding:FSIIIConditionCode.userSelected
                Definition

                Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                ShortIf this coding was chosen directly by the user
                Comments

                Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                Control0..1
                Typeboolean
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                58. Condition.code.coding:SCTConditionCode
                Slice NameSCTConditionCode
                Definition

                A reference to a code defined by a terminology system.

                ShortSNOMED CT condition code
                Comments

                Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                Control0..1
                BindingThe codes SHALL be taken from Condition/Problem/DiagnosisCodes
                (required to http://hl7.org/fhir/ValueSet/condition-code)
                TypeCoding
                Is Modifierfalse
                Summarytrue
                Requirements

                Allows for alternative encodings within a code system, and translations to other code systems.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                60. Condition.code.coding:SCTConditionCode.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                62. Condition.code.coding:SCTConditionCode.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on Condition.code.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 64. Condition.code.coding:SCTConditionCode.system
                  Definition

                  The identification of the code system that defines the meaning of the symbol in the code.

                  ShortIdentity of the terminology system
                  Comments

                  The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                  Control1..1
                  Typeuri
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  Need to be unambiguous about the source of the definition of the symbol.

                  Pattern Valuehttp://snomed.info/sct
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  66. Condition.code.coding:SCTConditionCode.version
                  Definition

                  The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                  ShortVersion of the system - if relevant
                  Comments

                  Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                  NoteThis is a business version Id, not a resource version Id (see discussion)
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  68. Condition.code.coding:SCTConditionCode.code
                  Definition

                  A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                  ShortSymbol in syntax defined by the system
                  Control0..1
                  Typecode
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  Need to refer to a particular code in the system.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  70. Condition.code.coding:SCTConditionCode.display
                  Definition

                  A representation of the meaning of the code in the system, following the rules of the system.

                  ShortRepresentation defined by the system
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  72. Condition.code.coding:SCTConditionCode.userSelected
                  Definition

                  Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                  ShortIf this coding was chosen directly by the user
                  Comments

                  Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                  Control0..1
                  Typeboolean
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  74. Condition.code.coding:FFBConditionCode
                  Slice NameFFBConditionCode
                  Definition

                  A reference to a code defined by a terminology system.

                  Short[DA] FFB undertemakode
                  Comments

                  Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                  Control0..1
                  TypeCoding
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  Allows for alternative encodings within a code system, and translations to other code systems.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  76. Condition.code.coding:FFBConditionCode.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  78. Condition.code.coding:FFBConditionCode.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on Condition.code.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 80. Condition.code.coding:FFBConditionCode.system
                    Definition

                    The identification of the code system that defines the meaning of the symbol in the code.

                    ShortIdentity of the terminology system
                    Comments

                    The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                    Control1..1
                    Typeuri
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    Need to be unambiguous about the source of the definition of the symbol.

                    Pattern Valueurn:oid:1.2.208.176.2.22
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    82. Condition.code.coding:FFBConditionCode.version
                    Definition

                    The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                    ShortVersion of the system - if relevant
                    Comments

                    Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                    NoteThis is a business version Id, not a resource version Id (see discussion)
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    84. Condition.code.coding:FFBConditionCode.code
                    Definition

                    A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                    ShortSymbol in syntax defined by the system
                    Control0..1
                    Typecode
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    Need to refer to a particular code in the system.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    86. Condition.code.coding:FFBConditionCode.display
                    Definition

                    A representation of the meaning of the code in the system, following the rules of the system.

                    ShortRepresentation defined by the system
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    88. Condition.code.coding:FFBConditionCode.userSelected
                    Definition

                    Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                    ShortIf this coding was chosen directly by the user
                    Comments

                    Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                    Control0..1
                    Typeboolean
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    90. Condition.code.coding:SKS-D
                    Slice NameSKS-D
                    Definition

                    A reference to a code defined by a terminology system.

                    Short[DA] Kode fra D-hierarkiet i SKS
                    Comments

                    Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                    Control0..1
                    TypeCoding
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    Allows for alternative encodings within a code system, and translations to other code systems.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    92. Condition.code.coding:SKS-D.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    94. Condition.code.coding:SKS-D.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on Condition.code.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 96. Condition.code.coding:SKS-D.system
                      Definition

                      The identification of the code system that defines the meaning of the symbol in the code.

                      ShortIdentity of the terminology system
                      Comments

                      The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                      Control1..1
                      Typeuri
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      Need to be unambiguous about the source of the definition of the symbol.

                      Pattern Valueurn:oid:1.2.208.176.2.4.12
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      98. Condition.code.coding:SKS-D.version
                      Definition

                      The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                      ShortVersion of the system - if relevant
                      Comments

                      Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                      NoteThis is a business version Id, not a resource version Id (see discussion)
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      100. Condition.code.coding:SKS-D.code
                      Definition

                      A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                      ShortSymbol in syntax defined by the system
                      Control0..1
                      Typecode
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      Need to refer to a particular code in the system.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      102. Condition.code.coding:SKS-D.display
                      Definition

                      A representation of the meaning of the code in the system, following the rules of the system.

                      ShortRepresentation defined by the system
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      104. Condition.code.coding:SKS-D.userSelected
                      Definition

                      Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                      ShortIf this coding was chosen directly by the user
                      Comments

                      Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                      Control0..1
                      Typeboolean
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      106. Condition.code.coding:ICPC2code
                      Slice NameICPC2code
                      Definition

                      A reference to a code defined by a terminology system.

                      ShortICPC2 code
                      Comments

                      Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                      Control0..1
                      TypeCoding
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      Allows for alternative encodings within a code system, and translations to other code systems.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      108. Condition.code.coding:ICPC2code.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      110. Condition.code.coding:ICPC2code.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Condition.code.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 112. Condition.code.coding:ICPC2code.system
                        Definition

                        The identification of the code system that defines the meaning of the symbol in the code.

                        ShortIdentity of the terminology system
                        Comments

                        The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                        Control1..1
                        Typeuri
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Requirements

                        Need to be unambiguous about the source of the definition of the symbol.

                        Pattern Valueurn:oid:1.2.208.176.2.31
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        114. Condition.code.coding:ICPC2code.version
                        Definition

                        The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                        ShortVersion of the system - if relevant
                        Comments

                        Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                        NoteThis is a business version Id, not a resource version Id (see discussion)
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        116. Condition.code.coding:ICPC2code.code
                        Definition

                        A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                        ShortSymbol in syntax defined by the system
                        Control0..1
                        Typecode
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Requirements

                        Need to refer to a particular code in the system.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        118. Condition.code.coding:ICPC2code.display
                        Definition

                        A representation of the meaning of the code in the system, following the rules of the system.

                        ShortRepresentation defined by the system
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Requirements

                        Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        120. Condition.code.coding:ICPC2code.userSelected
                        Definition

                        Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                        ShortIf this coding was chosen directly by the user
                        Comments

                        Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                        Control0..1
                        Typeboolean
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Requirements

                        This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        122. Condition.code.text
                        Definition

                        A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                        ShortPlain text representation of the concept
                        Comments

                        Very often the text is the same as a displayName of one of the codings.

                        Control0..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Requirements

                        The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        124. Condition.bodySite
                        Definition

                        The anatomical location where this condition manifests itself.

                        ShortAnatomical location, if relevant
                        Comments

                        Only used if not implicit in code found in Condition.code. If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension bodySite. May be a summary code, or a reference to a very precise definition of the location, or both.

                        Control0..*
                        BindingFor example codes, see SNOMEDCTBodyStructures
                        (example to http://hl7.org/fhir/ValueSet/body-site)

                        Codes describing anatomical locations. May include laterality.

                        TypeCodeableConcept
                        Is Modifierfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        126. Condition.subject
                        Definition

                        Indicates the patient or group who the condition record is associated with.

                        ShortWho has the condition?
                        Control1..1
                        TypeReference(Danish Core Patient Profile)
                        Is Modifierfalse
                        Summarytrue
                        Requirements

                        Group is typically used for veterinary or public health use cases.

                        Alternate Namespatient
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        128. Condition.encounter
                        Definition

                        The Encounter during which this Condition was created or to which the creation of this record is tightly associated.

                        ShortEncounter created as part of
                        Comments

                        This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter. This record indicates the encounter this particular record is associated with. In the case of a "new" diagnosis reflecting ongoing/revised information about the condition, this might be distinct from the first encounter in which the underlying condition was first "known".

                        Control0..1
                        TypeReference(Encounter)
                        Is Modifierfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        130. Condition.onset[x]
                        Definition

                        Estimated or actual date or date-time the condition began, in the opinion of the clinician.

                        ShortEstimated or actual date, date-time, or age
                        Comments

                        Age is generally used when the patient reports an age at which the Condition began to occur.

                        Control0..1
                        TypeChoice of: dateTime, Age, Period, Range, string
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        132. Condition.abatement[x]
                        Definition

                        The date or estimated date that the condition resolved or went into remission. This is called "abatement" because of the many overloaded connotations associated with "remission" or "resolution" - Conditions are never really resolved, but they can abate.

                        ShortWhen in resolution/remission
                        Comments

                        There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated.

                        Control0..1
                        This element is affected by the following invariants: con-4
                        TypeChoice of: dateTime, Age, Period, Range, string
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        134. Condition.recordedDate
                        Definition

                        The recordedDate represents when this particular Condition record was created in the system, which is often a system-generated date.

                        ShortDate record was first recorded
                        Control0..1
                        TypedateTime
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        136. Condition.recorder
                        Definition

                        Individual who recorded the record and takes responsibility for its content.

                        ShortWho recorded the condition
                        Control0..1
                        TypeReference(Danish Core Practitioner Profile, PractitionerRole, Danish Core Patient Profile, Danish Core Related Person Profile)
                        Is Modifierfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        138. Condition.asserter
                        Definition

                        Individual who is making the condition statement.

                        ShortPerson who asserts this condition
                        Control0..1
                        TypeReference(Danish Core Practitioner Profile, PractitionerRole)
                        Is Modifierfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        140. Condition.stage
                        Definition

                        Clinical stage or grade of a condition. May include formal severity assessments.

                        ShortStage/grade, usually assessed formally
                        Control0..*
                        TypeBackboneElement
                        Is Modifierfalse
                        Summaryfalse
                        Invariantscon-1: Stage SHALL have summary or assessment (summary.exists() or assessment.exists())
                        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        142. Condition.stage.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        144. Condition.stage.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        146. Condition.stage.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        148. Condition.stage.summary
                        Definition

                        A simple summary of the stage such as "Stage 3". The determination of the stage is disease-specific.

                        ShortSimple summary (disease specific)
                        Control0..1
                        This element is affected by the following invariants: con-1
                        BindingFor example codes, see ConditionStage
                        (example to http://hl7.org/fhir/ValueSet/condition-stage)

                        Codes describing condition stages (e.g. Cancer stages).

                        TypeCodeableConcept
                        Is Modifierfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        150. Condition.stage.assessment
                        Definition

                        Reference to a formal record of the evidence on which the staging assessment is based.

                        ShortFormal record of assessment
                        Control0..*
                        This element is affected by the following invariants: con-1
                        TypeReference(ClinicalImpression, DiagnosticReport, Observation)
                        Is Modifierfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        152. Condition.stage.type
                        Definition

                        The kind of staging, such as pathological or clinical staging.

                        ShortKind of staging
                        Control0..1
                        BindingFor example codes, see ConditionStageType
                        (example to http://hl7.org/fhir/ValueSet/condition-stage-type)

                        Codes describing the kind of condition staging (e.g. clinical or pathological).

                        TypeCodeableConcept
                        Is Modifierfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        154. Condition.evidence
                        Definition

                        Supporting evidence / manifestations that are the basis of the Condition's verification status, such as evidence that confirmed or refuted the condition.

                        ShortSupporting evidence
                        Comments

                        The evidence may be a simple list of coded symptoms/manifestations, or references to observations or formal assessments, or both.

                        Control0..*
                        TypeBackboneElement
                        Is Modifierfalse
                        Summaryfalse
                        Invariantscon-2: evidence SHALL have code or details (code.exists() or detail.exists())
                        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        156. Condition.evidence.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        158. Condition.evidence.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        160. Condition.evidence.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        162. Condition.evidence.code
                        Definition

                        A manifestation or symptom that led to the recording of this condition.

                        ShortManifestation/symptom
                        Control0..*
                        This element is affected by the following invariants: con-2
                        BindingFor example codes, see ManifestationAndSymptomCodes
                        (example to http://hl7.org/fhir/ValueSet/manifestation-or-symptom)

                        Codes that describe the manifestation or symptoms of a condition.

                        TypeCodeableConcept
                        Is Modifierfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        164. Condition.evidence.detail
                        Definition

                        Links to other relevant information, including pathology reports.

                        ShortSupporting information found elsewhere
                        Control0..*
                        This element is affected by the following invariants: con-2
                        TypeReference(Resource)
                        Is Modifierfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        166. Condition.note
                        Definition

                        Additional information about the Condition. This is a general notes/comments entry for description of the Condition, its diagnosis and prognosis.

                        ShortAdditional information about the Condition
                        Control0..*
                        TypeAnnotation
                        Is Modifierfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))